图1

ATOTO 3-in-1 car wireless phone charger holder relieves low battery anxiety, guarantees a safe journey.  FreeHolder01 is applicable to all kinds of mobile phones with the wireless charging function on the market, such as iPhone 12/ /12 Mini/ 12 Pro / 12 Pro Max/ 11/ 11 Pro Max / XS Max / XR / XS / X / 8 plus / 8, Google Pixel 3 XL, Samsung Galaxy Edge S7 / S8, Samsung Galaxy Note10, Samsung Galaxy S10+ / S10 / S9 and more.

 

          Features & Applications         

No need to take off your phone case while charging. For example, rubber, plastic or TPU cases with the thickness within 4 mm are applicable. However, please note that metal and wallet cases, as well as cases with attachments like rings, cards, pop sockets or magnets are not supported.
The 360°ball joint and 210°adjustable telescopic arms enable you to adjust the holder by any angles, and then you can have an ideal and safe viewing angle to make a phone call, use the navigation or any other Apps.
With the upgrade air vent clip and strong suction cup, the charger can be fixed on your car air vent, windshield, and dash board stably (Textured dashboards are not supported, also the soft, vinyl, curved, plush fabrics, or bumpy surface). No charger falling distraction, focused on your driving.
Regarding 15W, 10W, 7.5W fast charging modes, the QC 3.0 car charger adapter is required as the power source (Included in the package). With the built-in chips, the charger can protect your phone from overcharge, over temperature, over voltage, short circuit, etc. while charging.
After using for a long time, you can clean the suction cup by warm water and let it air dry to restore its stickiness. Besides, the suction cup can be reused, you can move it from one place to another on the dashboard or windshield freely.

There is a LED charging indicator on the bottom foot, when the phone is being properly charged, the indicator shows the green light, as the battery is full, then the light will be off. Moreover, if there is any abnormality, the indicator will flash the red light. Such an indicator will keep you informed about the charging status at any time.

The clip hook will catch one of car air vent blades, and with a lock nut, the hook length can be adjusted to fit the width of the air vent fan blade, which fixes the phone holder on your car air vent much more firmly compared with common clips. Just rotate the lock nut to fix and remove the holder easily. 

Applicable Smartphone Models

  • iPhone 12/12Pro/11/11 Pro/11 Pro Max, iPhone X/XS/XS Max, iPhone XR, iPhone 8 Plus, iPhone 8.
  • Samsung Galaxy S7/S7 Edge/S7 Active/S8/S8 Plus/S8 Active/Note8/S9/S9 Plus/Note9/S10/S10 Plus/S10e/Note10.
  • Google Pixel 3/3XL/Pixel4/4XL/Nexus4/Nexus5/Nexus6.
  • LG V30/V35/V40(Thin Q)/V50(Thin Q)/G6/G7/G8.
  • Any Other Qi-enabled Phones. QC 3.0/2.0 car chargers are demanded.
Notes
  • For 15W/10W/7.5W fast charging, the QC 3.0/QC 2.0 car charger is demanded.
  • 5W standard wireless charging for any other Qi-enabled smartphones, the 5V/2A adapter is demanded.
  • Circuits and chips are inside the device, please do not use the charger under ultra-high temperatures.